3/4" NPT Filter Bowl Adapter

The 3/4-Inch NPT Filter Bowl Adapter provides a secure transition between a compatible Flow filter-head assembly and standard 3/4-inch NPT plumbing. Its threaded connection helps maintain proper alignment and a leak-resistant fluid path through the filtration circuit. Replace the adapter when its threads, flange surfaces, or sealing interface show corrosion, deformation, scoring, or other damage that could cause leakage or restrict filter servicing.

Related Products:

• Filter Head 5 Inch Long (A-6059) — houses a compatible screen element and connects with supporting filter-system components.
• Filter Housing 10 Inch Long (A-6060) — provides the enclosure for compatible cartridge-style filtration components.
• 100 Mesh In-Tank Screen Filter 3.3 Inch Long (A-3582) — captures larger debris before it reaches downstream pump and high-pressure components.
• 90 Durometer Nitrile O-Ring (A-00633-023) — provides a durable static seal in compatible filter-head and filter-housing assemblies.
• 10 Micron Breather Vent 3/8 Inch NPT (A-23705-1) — equalizes tank pressure while limiting airborne contamination from entering the system.

Installation note: Isolate and drain the filtration circuit before removing the adapter. Clean the mating flange and NPT threads, inspect the sealing element, and apply only the approved thread sealant where required. Start the threaded connection by hand and avoid overtightening, which can damage the adapter or adjoining filter components.