60K/87K Electronic Intensifier Firing Pin

Hardened striker that the electronic shift actuator uses to trip the intensifier at end-of-stroke. Precision length and a polished tip deliver crisp, repeatable shifts without mushrooming, protecting pilot components and keeping pressure ramps smooth on both 60k and 87k systems. Replace at the first sign of rounding, bending, or inconsistent shift timing. 

Related Products:

• Electronic Shift Proximity Sensor Assembly (011275-1) — primary end-of-stroke sensor that works with the firing pin.
• Actuator Assembly, Electronic Shift (B-8346-1) — houses and drives the firing pin.
• Compression Spring .396 ID × .48 OD (A-2409) — return spring that resets the actuator each stroke.
• Shift Module Assy, Integrated (A-19560) — reads the sensor and commands the pilot valves.
• Mechanical Shift Pin — Intensifier (B-1611-1) — mechanical backup trigger for shift timing.
• Cable Assy, Dbl-Ended, 4-P, Mult (713802-××) — cordset for the proximity sensor connection.

Service tip: Set pin projection to spec and use medium strength threadlocker on the jam nut. After install, jog at low pressure and verify clean reversals on both ends.